Hub-Tauch-Anlagen

OurSuper Wave-Series

Cleaning by immersion with a patented technology

Our ambition was to develop an economic solution with easy handling in a high quality for cleaning processes by immersion, e.g. degreasing, paint stripping, conservation, passivation or bonderising.

The result is our lift-dipping plant type SUPER WAVE, naturally in stainless steel like all our machines.

The SUPER WAVE is available in two standard versions:

SW-L for aqueous alkaline cleaning fluids with a pH from 7-12
SW-K for mineral solvents with a flash point above 55°C

Complimentary

Brochure

Product

SWL16/6
SW-L 16/6 with special equipment replacement of the switch box for using the customer's roller conveyor

This innovative machine works with a linear lift-dipping process. The internationally patented construction of the new clack valve system produces an exceptional cleaning result.

The combination of two or more machines in a line offers the possibility to integrate different cleaning processes on an economic price level.

Normal lift-dipping machines have the problem, that oil from the cleaned parts floats on the surface of the bath. By lifting the lifting table, the cleaned parts pass through the oil and get dirty again. In the Super Wave, we resolved this problem. We developed the surface rinsing with a separating system. In this way, oil is separated from the water and the parts are not soiled again.

Application

This machine is conceived for aqueous, alkaline cleaning agents with a pH value from 7-12.

We recommend the Super Wave for oily and dusty parts, e.g. motor blocks, tubes, plates etc. Parts with holes or blind holes can also be washed in this machine, but the diameter of the holes remains an important factor.

Ou lift-dipping plants can also be equipped with specific equipment for paint-stripping and bonderising.

Mode of operation

Swirled medium

Cleaning by immersion is carried out with an oscillating lifting and dipping of the pneumatic lifting unit into the bath. This effectuates a thorough cleaning of the parts, reinforced by the patented clack valve system that optimises the swirling of the medium.

By opening the cover, the lifting unit lifts automatically into the position for loading and unloading (upper edge of the machine). The dirty parts can be loaded. After pressing the button "Close" and activating the switch "Washing", the lifting unit dips inside the bath, the cover is closed automatically. As long as the switch "Washing" is activated, the lifting unit effectuates continuous lift and dipping movements inside the bath.

The loading platform disposes of cavities and clacks. Those clacks can close the cavities (clack valve system). When moving the loading platform down, the clacks will close the cavities and the medium bathes the dirty parts. When moving the loading platform up the clacks will open and medium flows through the parts. This technology achieves a very effective cleaning result.

Technical Data

SW-L 8/6 SW-L 16/6
Nominal input voltage400 V / 50 Hz / 16 A400 V / 50 Hz / 32 A
Usable width800 mm1600 mm
Usable depth600 mm600 mm
Usable height300 mm300 mm
External dimensions WxDxH1300 x 1035 x 1250 mm2180 x 1035 x 1420 mm
Max. loading capacity100 kg100 kg
Max. tank volume250 - 300 l500 - 650 l
Height of strokesbis 60 mmbis 60 mm
Strokes (max. loading capacity)25 strokes25 strokes
Strokes (unloaded)50 strokes50 strokes
Necessary compressed air connection

8 bar

3/8" - 1/2"

8 bar

3/8" - 1/2"

Heating7,5 kW12 kW
Operating temperature - standard62°C62°C
Operating temperature - optional75°C75°C
On-time70 %70 %

Standard equipment

SWL-8/6 with special equipment
SW-L 8/6 with special equipment
  • Conceived for alkaline aqueous cleaning fluids with a pH-value from 7-12
  • Solid washing tank made from stainless steel
  • The washing tank is completely insulated
  • Slewing cover in stainless steel - opening and closing of the cover by a pneumatic cylinder
  • Continuous oscillating movements - The swirling of the medium is intensified by the patented clack valve system
  • Protection against dry-running - Safety shut down of the heater when the medium level is too low
  • Digital temperature control "Parts Clean Control" with fault indication
  • Tubular electric heater made from stainless steel
  • Switchboard conform to VDE-instructions
  • Solid and compact construction with a clear arrangement of the operating elements
  • Machine conform to CE

Optional equipment

The following standard equipment is available:

  • Drain cock
  • Collecting pan
  • Transport trolley
  • Automatic level control
  • Oil separator
  • Surface oil removal
  • Additional filtration
  • small parts baskets in stainless steel
  • Cleaning agent

Further options on demand.

 

enquiry - Super Wave SW-L

Product

SWK-8/6
SW-K 8/6

This innovative machine works with a linear lift-dipping process. The internationally patented construction of the new clack valve system produces an exceptional cleaning result.

The combination of two or more machines in a line offers the possibility to integrate different cleaning processes on an economic price level. 

Application

This machine is conceived for mineral solvents with a flashing point above 55°C.

We recommend the Super Wave for oily and dusty parts, e.g. motor blocks, tubes, plates etc. Parts with holes or blind holes can also be washed in this machine, but the diameter of the holes remains an important factor. 

Mode of operation

Swirled medium

Cleaning by immersion is carried out with an oscillating lifting and dipping of the pneumatic lifting unit into the bath. This effectuates a thorough cleaning of the parts, reinforced by the patented clack valve system that optimises the swirling of the medium.

By opening the cover, the lifting unit lifts automatically into the position for loading and unloading (upper edge of the machine). The dirty parts can be loaded. After pressing the button "Close" and activating the switch "Washing", the lifting unit dips inside the bath, the cover is closed automatically. As long as the switch "Washing" is activated, the lifting unit effectuates continuous lift and dipping movements inside the bath.

The loading platform disposes of cavities and clacks. Those clacks can close the cavities (clack valve system). When moving the loading platform down, the clacks will close the cavities and the medium bathes the dirty parts. When moving the loading platform up the clacks will open and medium flows through the parts. This technology achieves a very effective cleaning result.

Technical Data

SW-K 8/6SW-K 16/6
Rated input voltage230 V / 50 Hz230 V / 50 Hz
Usable width800 mm1600 mm
Usable depth600 mm600 mm
Usable height300 mm300 mm
External dimensions (WxDxH)1300 x 1035 x 1250 mm2180 x 1035 x 1420 mm
Loading capacity max.100 kg100 kg
Bath volume max.250 - 300 l500 - 650 l
Height of stroke (washing)bis 60 mmbis 60 mm
Max. strokes (loaded)25 strokes25 strokes
Max. strokes (unloaded)50 strokes50 strokes
Necessary compressed air connection

8 bar

3/8" - 1/2"

8 bar

3/8" - 1/2"

Heating--
Operating temperature (standard)max. 35°Cmax. 35°C
On-time70 %70 %

Standard equipment

Lifting unit 16/6
Clack valve system
  • Conceived for solvent based cleaning agents with a flashing point above 55°C
  • Solid washing tank made from stainless steel
  • Swivelling cover made from stainless steel - opening and closing of the cover by a pneumatic cylinder
  • Continuous oscillating movements - The patented clack valve system enforces the medium turbulences
  • Digital temperature indicator "Parts Clean Control" with fault indication
  • Switchboard accordant to VDE-instructions
  • Solid and compact construction with a clear arrangement of the operating elements
  • Machine conform to CE

Optional equipment

SW-K
SW-K 16/6 with special equipment housing for filtered exhaustion

The following optional equipment is available:

  • Drain cock
  • Collecting pan
  • Exhaustion
  • Transport trolley
  • Additional filtration
  • Small parts baskets made from stainless steel

Further options on demand.

enquiry - Super Wave SW-K